PUTERI PALMA CONDOMINIUM IOI RESORT CITY
Physical Site Works
Cutting crew carrying out sawing operation.
Cutting crew carrying out sawing operation.
Cutting crew carrying out sawing operation and removal of cut-out to ground level.
Secondary breaking of cut panels into small pieces by hydraulic burster.
Install m.s. cover on negative side.
Drill pilot holes for looping the diamond wire at all corners from the other compartment.
Diamond wire sawing is the most efficient way to remove RC structure if compare to other type of cutting method.
After the cut-out removed, we can see the m.s. cover is behind the opening.
To prepare the substrate and reinstate the concrete cover using formwork grouting method .
The high early strength cementitious grout used for this special job can be open for service after 8 hours of placement.
This compartment is resumed for service after 11 hours of work which was allowed by client.
The wire saw is mounted on wall.
The workers is installing the wire saw.
The cut-out block is being extracted from wall after the wire has sliced at 4 side of the opening.
The sawn surface is neat and smooth.
Wire Saw are set and ready to operate.
Diamond Wire saw are used to accomplish the RC structure removal job without hitches.
All cut-outs are lifted, removed and stock pile at ground level.
Wire Saw are set and ready to operate.
Diamond Wire saw are used to accomplish the RC structure removal job without hitches.
All cut-outs are lifted, removed and stock pile at ground level.
The concrete slab opening are accomplished by diamond wire sawing.
The hydraulic diamond coring system is installed to made hole on slab under sea-water.
The concrete slab opening are accomplished by diamond wire sawing.
The hydraulic diamond coring system is installed to made hole on slab under sea-water.